 |
Axial fans offer higher efficiency |
|
Axial fans offer higher efficiency |
Axial Flow Fans
Daltec's axial flow fans provide a viable alternative to centrifugal fans. Axial flow fans are generally lower in initial cost and provide a space saving factor of 50 - 70% over centrifugal fans of similar design and capacity.
Application
Generally, they are used when large volumes of clean air are moved at relatively low static pressures as they offer higher efficiency at lower operating costs. Tubeaxial fans should be considered (and are available) when low static pressures are specified; while vaneaxial fans allow selection at higher pressure while maintaining high efficiency. These fans may be staged to provide even higher static pressure capabilities.
Product Features
Daltec axial flow fans consist of a cylindrical casing with either an internal motor support (Arr4) or an internal bearing support and shaft for V-belt drive models (Arr.9). Tubeaxial fans are commonly employed on exhaust systems with lower pressure requirements. The addition of upstream or downstream guide vanes converts the fan into a vaneaxial unit which has a higher static pressure and significantly improved efficiency. Daltec's axial flow product line offers four designs: TA, TAW, DTA and DVA.
Custom Tailored Solutions
Custom design feature that are available with axial flow fans include:
The FIS fan mounts a fan inside a tubular silencer with the fan ducted on the inlet and outlet thereby radiated noise is greatly reduced.
Copyright © 2010. Daltec Fans | All Rights Reserved | Search Engine Optimization | Just Say ON |
